|
Ditel BETA Series -
digital panel meters
 |
Digital panel meters, indicators, controllers-
1/8 DIN, 96x48x120 mm 2x displays
-
Digits: 14mm /7mm
-
MODBUS RTU
-
Power supply: 115/230 Vac, (2) 24/48 Vac
-
Multi-function, process, load Cell,
-
temperature,
pulse input,
-
counter, batch, totaliser, tachometer, 2 input + 1
virtual,
-
maths ops, 27 programmable logical functions,
-
Control outputs
- relays, analogue, PNP, NPN,
-
BCD, RS232, RS485
-
NEMA 4 (IP65)
-
FREE Ditel Capture data acquisition software
-
three years warranty
-
- Manufactured by Ditel
|
INSTRUMENT MODELS
BETA-M
Datasheet  |
The BETA-M
digital panel meter, indicator and controller is a digital multifunction instrument whose input
options include, when selected by the user, the following programmable input
types :
Process
variables (mV, V, or mA)
Pt100 Temperature sensors or Thermocouples J, K, T, R, S, E.
Weight, load, force, torque with bridge sensor up to ±300mV.
Displacement, linear potentiometer.
29 logical functions user selectable.
Two kind of filters with 10 levels
Average up to 200 readings.
3 rate of display.
Very easy to
program to be adapted to any industrial process.
-
FREE SOFTWARE
- DITEL Capture data acquisition software
|
|
|
|
BETA-D
Datasheet
|
BETA-D digital
panel meter, indicator and controllers are designed for counting and totalising applications or as
tachometer with totalizer which accepts pulse signals generated by a wide
range of sensors in the market.
With a 6
digits display you can see up to 3 partial counters and an 8 digits
display where it is visualized simultaneously with one of the three totals.
With the tachometer-totalizer it is possible to measure the velocity in
programmable units (Flow ) and the accumulated total at the same time
(Cost).
Outstanding characteristics:
Bi-directional counter with phase squaring X1, X2, X4.
Independent multiplying factor per each channel.
2 physical inputs and 1 virtual input.
Independent programming of unit/batch on each channel.
Arithmetic operations between channels (+, -, x, / and %)
Up to 3 totalizers.
Tachometer with spinning direction indication.
Setpoint programming direct access.
27 logical functions user programmable.
Latch or Pulse relay function.
ModBus RTU protocol.
Batch counter per each channel.
Slow-Down function.
Track-auto function.
Programming lockout by software (13 levels).
-
FREE SOFTWARE
- DITEL Capture data acquisition software
|
|
|
 |
|
|
 |
|
Full Brochure with specification available on request.
Send mail to cliff@vydas.co.uk with
questions or comments about this web site.
|