Micra Standard Series - digital panel meters
 |
|
INSTRUMENT MODELS
|
****** MICRA-P DISCONTINUED *****
|
INSTRUMENT
NOW REPLACED BY
MICRA-M
The MICRA-P digital panel meter, indicator and controller is an instrument that accepts any voltage or current process signal to measure process variables with direct indication in engineering units. Fully software programmable, the MICRA-P provides selectable input type ( ±10V DC or ±20mA DC) and two excitation voltages to feed the transducer (10V or 24V). Two scaling methods and selectable last digit resolution allow programming the display to match desired application
|
|
****** MICRA-C DISCONTINUED *****
|
INSTRUMENT
NOW REPLACED BY
MICRA-M
The MICRA-C digital panel meter, indicator and controller is an instrument that can be connected to a bridge type transducer
such as load cell to readout weight, load, torque, pressure, etc. The MICRA-C
provides two software-selectable input levels (30mV or 300mV) and two
excitation voltages (10V or 5V) to accommodate different cell types and
input sensitivities.
|
Micra-T
Datasheet
|
The MICRA-T digital panel meter, indicator and controller is an instrument for temperature
measurement in the Centigrade or the Fahrenheit scale. Fully keyboard
programmable, the MICRA-T can be configured for several types of temperature
sensors such as Pt100 or thermocouple types J, K or T. Other
software-programmable parameters are the resolution ( 1º or 0.1º ) and the
readout format ( ºC or ºF scale). In addition, there is the possibility of
programming via keyboard a temperature offset from -99 to +99 counts of
display, making it possible to compensate for an eventual drift between the
actual temperature and the measured value.
|
|
Mica-E
Datasheet
|
The MICRA-E digital panel meter, indicator and controller is an instrument with AC and DC
voltage input signals up to 600V or current signals up to 5A directly or up
to 9999 through an external shunt or current transformer. By connection to a
tachogenerator or an alternator, this model can display velocity in
engineering units. Totally keyboard programmable, the MICRA-E provides
selectable input, two scaling methods (by keyboard or by applying input
levels) and selectable display resolution.
|
|
Micra-F
Datasheet
|
The MICRA-F digital panel meter, indicator and controller accepts, when selected via DIP-switch,
most transducers or pulse generators and voltage signals from 10 to 600V AC.
This model offers the functions of a frequency meter, tachometer for rpm or
rate meter with programmable display to measure velocity in engineering
units. The software inside allows selecting the measurement type (frequency,
rpm, rate), scaling the display to suit desired units and modifying the
internal sampling time and limit time to adapt the meter to the specific
application.
|
|
Micra-I
Datasheet
|
The MICRA-I digital panel meter, indicator and controller offers the functions of PULSE COUNTER
and CHRONOMETER with two inputs for a variety of transducers or pulse
generators. It can accept signal levels from mV to 24V as selected via DIP-switch. The software inside allows several functions to be selected by the user : • the meter configuration (counter or chronometer), • the input multiplier for the counter or the time range for the chronometer, inhibition of the RESET key.
|
 |
VYDAS
- Short Form Product Brochure PDF file
|
|
 |
|
Full Brochure with specification available on request.
Link to : Ditel
|
|