Vydas Web Banner

Pressure transducers and instrumentation

Wide range pressure transducers

STANDARD transducers from stock

CUSTOM designs & specials

High quality stainless steel housing

Long life and reliability

Suitable for hostile environments

Gage, absolute and differential

signal conditioning & readouts

Manufactured by Peltron Ltd

Pressure measurement equipment.

The Peltron pressure transducers and transmitter series are designed to operate in hostile environments and yet give outstanding sensitivity, linearity and hysteresis. The piezoresistive sensors are housed in fluid filled cylindrical cavities and isolated from the measured media by stainless steel diaphragms and housings.

These pressure transducers are used for gage, absolute and differential pressure measurement in many applications such as hydraulic control, chemical processing, industrial pneumatics, energy management and pressure instrumentation.

The Peltron pressure transmitter series cover whole pressure ranges in different temperature ranges with various electrical signal outputs. Pressure transmitters are available in 3 or 2 wire (current loop) supply output systems with optional digital LED or LCD indicators.

Typical power supply is 24V, and output signals: 4-20mA, 0-20mA, 0-5V, 0-10V.

Individual pressure transmitter series are intended for a range of different applications as indicated below.

Under construction.

PX series - industrial pressure process control

PXD series - PX differential version

PXW series - PX version with digital indicator

PXWD series - PXW differential version

PXT series - for high temperature applications, up to 250 °C

PXC series - for very heavily polluted applications (chlorine)

PXH series - for level liquid measurements

PXM series - for low pressures (1,25 .... 60mbar) with 4-20mA or 0-10Vdc o/p signal

NPX series - miniature version with 4-20mA current loop signal

JPX series - small transducer with 4-20mA or 0-10Vdc signal

NPXD series - NPX differential

MPX series - NPX subminiature (f max.22mm) 4-20mA or 0-10V (0-5V) o/p

PLH/PLD series - liquid level 0...100m pressure probes with 80-1000mA

PLX series - liquid level 0...100m pressure probes 4-20mA output

PT series - industrial pressure process control with 80 -1000mA DC o/p signal

PTD series - PT differential version.

CS series - diaphragm separated manometers .

MC series - electronic separated manometers with LCD indicators.

MCD series - MC differential version.

MPC202 pressure meter

MPC series - measurement equipment for PT, PTD and PLH transducers, with sensor supplying, voltage or current signal output and digital indicator.

MPC101 - Single Channel Pressure Meter

MPC201 - Single Channel Pressure Meter

MPC202 - Two Channel Pressure Meter

PWC series - Panel Digital Indicators

Digital Indicators with LED displays suited for use with pressure or linear displacement apparatus. They have standard current or voltage inputs and can be calibrated
to any units: with 3,5 digit or 4,5 digit display powered by 220V, 50Hz or 24V DC in a standard casing with 48x96mm window.

RPP401 is a group of fully programmable board LED display suited for use with pressure or linear displacement apparatus. They have standard current or voltage inputs and can be calibrated to any units: with 4 digit display, powered by 220V, 50Hz, two- relay output, in a standard casing with 48x96mm window.

WWC1000 display

Universal local LED display suitable for use with various transmitters (4-20mA only). The transmitter must be fitted with an analog output and a connector in accordance with DIN43650. The plug-on display is simply plugged in between connector and socket; it is then ready for operation! Scaling and the position of the decimal point may be set with two keys.
Case: 42,5x51,5x48,5mm.