Measurement of system electrical parameters: 

 

Nemo 96 HDL Multi-Function Power Monitor

(MF96101 Orange, MF96201 Grey))

 

 Unit Dimensions: H=96mm, W=96mm, D=62mm.

 Choice of Grey and Orange Bezels.

 1 slot active for RS232 or RS485 Comms Modules.

  1 Opto relay Pulse Output SPST-NO contact.

  Networkable Three Phase Network 80 - 500V.
  Single Phase 50 - 290V.
  Connection with external dedicated CT.
  Programmable external CT - VT ratio 1A or 5A.
  Active Energy cl.0,5s.
 

Options:

  Plug-In Modules for increased functionality (Comms Only)

NEMO 96 HDL Multifunction Network Monitor 

 

Manufactured by IME

 

Measurement of system electrical parameters: 

 

Nemo 96 HD Multi-Function Power Monitor

(MF96001)

 

 Unit Dimensions: H=96mm, W=96mm, D=62mm.

 4 active slots for plug in modules.

  Networkable Three Phase Network 80 - 500V.
  Single Phase 50 - 290V.
  Connection with external dedicated CT.
  Programmable external CT - VT ratio 1A or 5A.
  Active Energy cl.0,5s.
 

Options:

  Plug-In Modules for increased functionality
NEMO 96 HD Multifunction Network Monitor 

 

Manufactured by IME

 

 

Measurement of system electrical parameters: 

 

Nemo 96 HD+ Multi-Function Power Monitor

(MF96021 MF96022)

 

 Unit Dimensions: H=96mm, W=96mm, D=62mm.

 4 active slots for plug in modules.

  Networkable Three Phase Network 80 - 690V.
  Single Phase 50 - 400V.
  Connection with external dedicated CT.
  Programmable external CT - VT ratio 1A or 5A.
  Active Energy cl.0,5s.
 

Options:

  Plug-In Modules for increased functionality
NEMO 96 HD+ Multifunction Network Monitor 

 

Manufactured by IME

Measurement of system electrical parameters: 

 

NEMO 72L  network monitor   

(MF7FT400**  MF7FTU00**)

 

New - Multi-Function Power Monitor

Three-phase network 80...500V (phase - phase)

Single-phase network 50...290V

Connection with dedicated CT

External CT and VT programmable

True RMS value measurement

Unit Dimensions : H=72, W=72, D=81mm

 

NEMO72L Network Monitor 

 

Manufactured by IME

Measurement of system electrical parameters: 

 

NEMO D4-L  network monitor   

(MF6FT000**  MF6FT400**  MF6FTU00**)

 

Three-phase network 50...450V (phase-phase)

Single-phase network 30...260V

Connection with external dedicated CT

Programmable external

CT – VT ratio

Unit Dimensions : H=89.4, W=71.2, D=65.6mm

 

NEMOD4-L Network Monitor 

 

Manufactured by IME

 

Measurement of system electrical parameters: 

 

Conto D4-Pt MID Energy meter - MID Certified
 

Conto D4-Pt MID is the new three-phase 4 wire network energy meter MID certificate in accordance with the directive of the European Union 2004/22/EC annex MI-003. Input voltage direct 3x230(400)V, input current on CT /5A. Active energy count (cl.B EN50470-3), reactive energy count (cl.2 EN62053-21). Multimeasurement (A, V, Hz, P, Q, S, Pmd, Pmdmax, PF, hm). Output pulse repetition count active energy and RS485 communication (JBUS/MODBUS protocol).

 

Conto D4 Pt MID 

 

Manufactured by IME

 

D4CR8/IFR06 Pulse Acquisition Module

*** DISCONTINUED ***

(Replaced by Conto-imp IF4C001)

 

A DIN rail mounting module designed for use with any device that provides a pulsed signal, such as energy, gas, water and heating meters. The module will allow up to 8 parameters measured in such a way to be communicated to a remote point by RS485 3-wire serial link.

 

The D4CR8 uses JBUS/MODBUS protocol (other protocols available on request). Up to 255 units may be connected to a bus system, allowing the possibility of monitoring over 2000 pulsed signals at a single point.

 

Pulse Acquisition Module 

 

Manufactured by IME

 

 

 

Conto-imp IF4C001 Pulse Acquisition Module

 

Pulse Acquisition 4 module
Pulse input coming from energy, gas, water, heat meters, etc.
3 programmable input configurations:
PASSIVE
12 contact inputs

Unit and pulse weight programmable for each input
ACTIVE
6 contact inputs + 6 active inputs
Unit and pulse weight programmable for each input
SØ (GME ENEL)
1 SØ EN62053-31 inputs for multi-metering count
6 contact inputs
Unit and pulse weight programmable for each input
RS485 communication

Pulse Acquisition 4 Module 

 

Manufactured by IME

 

 

 

Measurement of system electrical parameters: 

     *** DISCONTINUED ***

 

The NEMO 96/25 (MFAT01026 230V 5A) and NEMO 96/35 (MF4AT40026 230V 5A RS485) are fully programmable system energy monitors. Micro-processor based, this device will tell you all you need to know about your a.c. system. Displays three phase voltage, current, power factor, power (kW, kVA, kVar), phase power (kW), frequency, energy and demand.

NEMO96 Multi-Function power monitor

Manufactured by IME

 

 

 

 

Measurement of system electrical parameters: 

*** DISCONTINUED ***

NEMO 96 3DSH (MF3CT00056) NEMO 96 3DSHCM and NEMO96 3DSH-SV energy monitors are housed in a flush mounting enclosure of 96 x 96mm, and will measure and display three phase voltage, current, power (kw, kVA, kVar), frequency, power factor and energy (kWh, kVarh), maximum demand (kW) and peak demand.

NEMO963DSH Multi-Function Power Monitor

Manufactured by IME

 

 

Measurement of system electrical parameters:

*** DISCONTINUED ***

 The NEMO 3D DIN rail mounting multi-function power monitor that will measure and display three phase electrical parameters via a 10mm high red LED display. A volt-free pulsed output is provided for kwh measurement. 

NEMO3D Multi-Function Power Monitor

Manufactured by IME

 

Measurement of system electrical parameters: 

 

NEMO 3D6SH, NEMO 3D6SHC and NEMO 3D6SHCM are DIN rail mounting multi-function power monitors that will measure and display three phase electrical parameters via a 10mm high red LED display. Optional RS485 or RS232 communication is also available, depending on the version used.

NEMO3D6SH Multi-Function Power Monitor

 

Manufactured by IME

 

Data Acquisition Software: 

Also available, the MIDAS Evo windows data acquisition software is designed to be used with some models of the NEMO multi-function power monitors equipped with RS485 communications.  

Data may collected from multiple NEMO's (devices) on the bus. 

MIDAS Evo data acquisition software   

 

Manufactured by IME

The IF2E001 Ethernet Gateway allows to connect the Modbus RTU devices of a RS-485 network to the Ethernet network through the Modbus TCP protocol.
 

The device guarantees a full isolation between lines, allowing the use even in the heavy environmental conditions. LED signalling of Ethernet activity, Link and Power on the serial line allows a direct monitoring of the system functionality.

 

The connection is made by removable screw-terminals (supply and RS-485) and RJ45 plug (Ethernet).

The device is housed in a rough self-extinguishing plastic container. Unit Dimensions: H=89mm, W=35mm, D=65.6mm

IF2E001 Ethernet Gateway 

Manufactured by IME

 

DAT 3580-USB Converter USB/RS485

 

- for use with Nemo Instruments and MIDAS software

 

Manufactured by Datexel

 

DAT 411 Double Output Power Supply

 

- for use with DAT 3580-USB Converter

 

Manufactured by Datexel